Home > Windows System32 > Windows Could Not Start Because.

Windows Could Not Start Because.


When you are prompted to do so, type the Administrator password. After about 2 mins I reconnected the cables. If that's the case, then just visit this http://support.microsoft.com/kb/308402/en-us website to download and use updated Windows XP Setup Floppies for your version of Windows XP. Use this document and all methods here at your own risk!Recovery ConsoleThe Windows XP Recovery Console1. More about the author

Back to top #10 B34R B34R Topic Starter Members 102 posts OFFLINE Local time:03:28 PM Posted 20 October 2005 - 07:31 AM May be able to get the XP disk. Once the computer ejects the cd automatically for you, remove the cd, and press the enter key on the keyboard to finish restarting hopefully to a fixed Windows Desktop.This is all The computer booted from the disks. i've tried to fix it with the xp cd but..

Windows Could Not Start Because The Following File Is Missing Or Corrupt

However I'm thinking surely there's something I can do short of ditching a 40gb drive which to my knowledge is working fine. garynortheast - 05-04-2013, 03:09 PM Reply Option 4 sorted it for me! See above for more details.

Nächstes Video PC Repair: File missing or corrupt: \windows\system32\config\system\ - Dauer: 11:00 Britec09 722.538 Aufrufe 11:00 System Restore Using the Recovery Console in Windows XP - Dauer: 10:15 CESABARREdotCOM 550.928 Aufrufe It's not necessary to pre-install the Recovery Console but it does help. Wird verarbeitet... What Is Windows System32 Click "Repair your computer." If you do not have this disc, contact your system administrator or computer manufacturer for assistance.

The only thing I can assume is that it has to do with the issue discussed in the “Recovery Console” section when using OEM or Sysprep imaged machines.Option 4I've tried writing Windows System32 Config System Fix Without Cd Option 5 helps a lot!!! old hardware ? Click “apply” then “ok”.You should now be back in the newly added hard drive and looking at the “system volume information” folder.

Microsoft Windows NT and Windows 2000 users: To restore the original boot.ini file in Microsoft Windows NT or Windows 2000 you will need an ERD and follow the below steps. Windows System32 Config System Windows 7 To restore this file follow the below steps. 1. It could be that all the stuff you need is located in a partion on your Hard disk, and you need to boot your computer from that floppy to acess it. Powered by vBulletin Version 4.2.0 Copyright © 2017 vBulletin Solutions, Inc.

Windows System32 Config System Fix Without Cd

I'd like to note I can't afford to spend any money on resolving this problem. You cannot view these instructions after you restart the computer in Safe Mode. Windows Could Not Start Because The Following File Is Missing Or Corrupt Report gaz› don2 - Feb 26, 2009 at 01:24 PM happens to me regularly every 6 weeks or so.i keep rolling back to factory settings which work but only temporarily.getting windows Windows System32 Config System File Download or read our Welcome Guide to learn how to use this site.

In part two, you copy the registry files from their backed up location by using System Restore. my review here Back to top #3 franktiii franktiii Members 309 posts OFFLINE Local time:03:28 PM Posted 18 October 2005 - 02:17 PM You need to get a windows disk or recovery disk The "rp" part of the folder name denoting it's a Restore Point 10. Type exit to restart the computer 12. Windows Could Not Start Because The Following File Is Missing Or Corrupt No Cd

  • However I cannot be sure of this.
  • Alternatively, these instructions explain how to create a bootable EasyRE recovery USB stick/drive.
  • Computer is now fast again and boots like a champ.
  • Access denied Error message, see Microsoft Knowledgebase Article 309531.
  • If the filename that appears on your computer is different, replace Ntoskrnl.exe with the filename from the error.
  • Good luck!
  • You will be prompted to enter the Administrator password.
  • Anyway, hope this helps this discussion.
  • Select the operating system you wish to fix, and then enter the administrator password. 5.

Press the “check names” button and then “Ok” button. If you have, continue, if not, shame on you for not backing up your data and I don't want to hear your whining if you lose your kids baby pictures. First, a backup of all current registry files is made so that they could be restored if anything goes wrong. http://cgmguide.com/windows-system32/windows-xp-missing-files.php If you have a dual-boot or multiple-boot system, use the arrow keys to select the installation that you want to access, and then press ENTER.

There are no rpxx files in the C:\Windows\System32\Restore folder. Windows System32 Config System Missing Or Corrupt Fix Windows 7 If the administrator password is blank, just press ENTER. I HOPE I NEVER HAVE TO RETURN, BUT IF I DO NEED HELP THIS IS WHERE I WILL COME.

if you are using Windows XP Home you can only log on as Administrator via Safe Mode.

When the login prompt displays, press the number next to the Windows version (minint or Windows) and type the login password. Quran- Jul 22, 2009 at 02:45 AM thank very much...the link to MYFIXes it worked . Symptom 1:  \Windows\System32\Config\System is missing or corrupt error screen on startup The Windows Registry is a hierarchical database that stores low-level settings for the Microsoft Windows operating system and for applications Windows System32 Config System File Missing Or Corrupt Solution Helpful +2 Report Merzee 10Posts Sunday May 30, 2010Registration date June 19, 2010 Last seen Jun 19, 2010 at 01:24 AM To Frustrated: Windows NT could not start because the C:\Winnt\System32\Ntoskrnl.exe

My computer has been regulary crashing. I attempted the same System Restore resolution (option #3) which had worked for me previously, however this time it asked me for the administrator password (last time, it did not.) Now The text in red will be what you type and the black text will what the system outputs or what is put there by the system. navigate to this website Turn back on the power-supply at the back of the machine.

Once you have the dead hard drive installed in the working computer please boot the working computer. UBCD for Windows Includes the TestDisk & PhotoRec Utility used to access/recover critical files. I've come to the conclusion my hard drive is faulty. Microsoft.com : chkdsk documentation 3.

This fix worked perfectly!!! Therefore any changes and settings that occurred after the Setup program was finished are lost. How do I repair it Helpful +3 Report sss Mar 24, 2010 at 09:00 AM http://support.microsoft.com/default.aspx?scid=kb;en-us;307545 Helpful +2 Report ANTI-VIRUS Oct 30, 2008 at 04:25 AM the problem is from the Remove the dead drive and put it back in your “dead” computer remembering to change your jumper settings if you reconfigured them before putting them in your working computer.

Note that this operation will restore the system to a state that might be very far from its current state; however, it still should be possible to recover user data in One would think that supposedly 'copying' files from the Config folder, that before they are instead "cut", that MS would have done a better job at protecting the OS and the It takes less than a minute and is completely free! Nothing happens.

HP Customer Support Z7_3054ICK0KGTE30AQO5O3KA30U7 hp-contact-secondary-navigation-portlet Actions ${title} Loading... Just my 2 pences worth. If the error persists, continue to Step 3. I have a feeling that my computer may have been shutdown incorrectly and thus the problem may not be linked to the random crashes which I believe to be the result

don2 Report cnu- Nov 23, 2008 at 01:27 AM \windows\system32\config\system Report musha- Apr 11, 2009 at 03:35 AM How can remoove error message in xp c:windows sysyem 32\config\system Report Lika- Jul I need to know what effect if any installing an OS on a drive with data already on it will do. Reboot the computer, as the computer is starting you should see a message to press any key to boot from the CD. Type the following at the command prompt: cd X:\i386 (where X is the main drive letter) Press the Enter key.

Wenn du bei YouTube angemeldet bist, kannst du dieses Video zu einer Playlist hinzufügen. The problem began when I started my computer this morning and got the following message.Windows could not start because the following file is missing or corrupt:\windows\system32\config\systemYou can attempt to repair this