Home > Hard Drive > Installing Vista On New WD SATA HDD

Installing Vista On New WD SATA HDD


The physical installation is actually pretty easy. Input the capacity of the partition and click on the Apply button. Select the Intel link. If you want a single partition (single drive letter), click on Next and your hard drive will be automatically partitioned and formatted as NTFS and Windows 7 will continue installing. this contact form

I also checked the bios options to disable support for SATA but there was no such option available. Nicolas Stears October 10, 2007 iepure YOU ARE THE BEST!!!!!!!!!!!!!!!!YOU ARE THE CHAMPION!!!!!!THHHHHHHHAAAAAAAANNNNNNKKKKK YYYYOOOOOOOUUUUU!!!!!!!!! Helpful +8 Report blendax 14Posts Friday August 8, 2008Registration date February 28, 2009 Last seen Aug 11, 2008 09:42AM hello, so the problem is that you must have a start up If you need assistance with your drive you will need to connect the drive to a computer running a supported operating system prior to calling or emailing our support team. http://support.wdc.com/knowledgebase/answer.aspx?ID=981

Western Digital Hard Drive Installation Software

On the next screen, select the drive you are upgrading/installing. I have a brand new disk drive installed without any OS. Googling XP on HP Pavillion DV9500 would probably help to find what I am talking about. On the next screen select Primary, Extended or a Logical Partition and click Next to continue.

  1. Again thx :) Matt Report rainier- Sep 14, 2009 01:59AM My computer is running much slower in last few months, so I decided to format it and reinstall all applications, including
  2. I have and HP Pavilion dv2500 and this guide doesn't work!
  3. However, it does still boot up and run windows.
  4. Reboot your Vista computer 17.
  5. Thanks!
  6. I managed the installation of the hardware on my own, but was at a loss on how to assign the drive letter.
  7. In general, the master drive should use the black connector on the end and the slave should use the gray connector in the middle, but if each drive is set either
  8. Enter the desired partition size.

Continue with the installation of Windows 2000, as instructed by the installation program. THANKS February 9, 2008 absconder i love you. Glad you got it all running. Western Digital Sata Hard Drive Jumper Settings Jim September 11, 2014 Reply Thanks.

I hope someone here can tell me what drivers I should download in order to get back to good old XP. How To Install Wd Internal Hard Drive All Rights Reserved. Vivian May 11, 2015 Reply Hi Gary, I just purchased a new 1T SSD HD to replace a failed 750GB hard drive in my desktop that had Windows 7 OS. If it does not you will need to contact your system or motherboard manufactuer for assistance.

I have a HP Pavillion which also has Phoenix BIOS. Western Digital Hard Drive Installation Utility My next Challange!!! I also purchased the Plugable USB 3.0 SATA Docking Station to format the new drive. Thanks alguy Dec 5, 2010 #5 captaincranky TechSpot Addict Posts: 11,835 +1,936 Windows 7 should be able to supply drivers to run in AHCI, but XP won't.

How To Install Wd Internal Hard Drive

Its simple: BECAUSE THE PEOPLE WHO DO KNOW WHAT IT MEANS WON'T NEED A GUIDE TO HELP THEM. https://www.pcmech.com/article/installing-a-hard-drive-step-by-step/ Anyway, in the meantime I had managed to get my head around the various processes, and familiarised myself better with nLite, which is an essential ingredient, and quite amazing for a Western Digital Hard Drive Installation Software The power supply of the enclosure that is, not the drive. Install Western Digital External Hard Drive February 14, 2008 Gopalakrishnan Hi Never have I seen so many praises for a step-by-step guide.

I'm familiar with computers but this is the first dual setup I have seen. weblink Whoever bad talks you on your idea or anyone's idea needs to think outside the box. i guess he could terms for you guys like FLIP ON AND OFF SWITCHES ON BACK OF METAL HUMMING BOX…. I used Nero to burn, on the slowest speed setting. Wd Sata Cable

It had been a long time since I had changed a hard drive and I was a little concerned about doing it. It uses jargon from start to finish, leaving someone who is new to computers dumbfounded. It is usually only necessary if you want to add more IDE drives than your computer will support with it's two built-in channels. navigate here When the installation got closer to the finish line, I received an error :- "line 0 of hivesft.inf is corrupted.

I did need to explore a little after using the wizard to find I had to right click on the new driver in the manager window to start the formating process Sata Interface Cable I have a GM5632E. Just be careful not to select a 64-bit driver if you are using 32-bit, or the wrong OS version.

Reply James Scholes says: June 23, 2009 at 2:47 pm Hi, I have a drive mounted in an external enclosure, on which the power supply has gone dead.

The result was that your machine quite rightly told you it could not use a new empty drive without preparing it by Partitioning and Formatting it. Stupid Lenovo sent me a new hard drive, because mine failed. Please let me know how to solve this November 17, 2007 Blago Simeonov Thank you very, very, very much!!!! How To Connect External Hard Drive To Pc Helped me over that last hurdle in getting my new drive up and running.

If the drive still is not detected after testing the cables, contact your controller card manufactuer to see if there is an update available. Thanks for the easy to follow instructions. I did not install the belwo mentioned system… I have three HD's installed currently two 20GB and a 10 GB. http://cgmguide.com/hard-drive/problem-recognising-2-sata-drives-in-new-pc.php At startup, the computer will display all the devices detected on the system.

Report curt- Jan 15, 2011 09:59AM thanks bob it was the solution I needed! January 20, 2008 grateway > As a note: almost all new systems came without the ability to change the HD SATA - PATA mode, and i f you try to change I tried going to Dell & to XP help sites but there are too many related instructions & not really what I needed. maybe by the time vista reaches sp3 and vista-lite is fully developed…but for now i'm not going to waste another minute speculating!

Having said that, this is a great article, A+. Am I doing something wrong? What I am not sure about is if the second hard drive should automatically store overflow data from the first drive same just as if the first drive were twice as I really thought these days were gone, absolutely bizarre how we are back in this position.

Do I require any jumpers on these drives if I were to hook up 2 SCSI drives together? Assign a drive letter not in use by other devices. Reply David D says: June 3, 2008 at 12:56 pm I'm planning a hard drive replacement. I always get a BSOD that says run a check disk to ensure that there is no problems with your drive.

This was more than enough to help even the Lowest level of expearance Swap or add a hard drive!!! can anyone help me this? Inicia sesión para que tengamos en cuenta tu opinión. Thanks a lot!